• Extremely compact
  • Sits 4” above the ground in its lowest position and can fit under all vehicle types
    
• Adjustable height
  • Technicians can work in a sitting or standing position.
  • Max height is 37” to stand and work comfortably.
  
  
• Easily Maneuverable
  • Comes with 4 clip-on wheels that can convert the lift into a complete car dolly.
    
• Manage a heavy load capacity
  • Load capacity of 2.5 T (5500 lbs.), factory tested to 3.8 T.
    
• Emergency stop feature
  • In case of emergency, to stop the lift from ascending or descending, disconnect the hydropneumatics pump from the air network. The load will stop moving and remain in a locked position.
• Designed to accept a reversible load
• Compatible with all passenger vehicles

• 882 lb. steel structure
• 4 alloy wheels
• 8 rubber pads
  • 1.6” x4
  • 2.4” x4
    
• 102” Universal, maintenance free, hydropneumatic pump
• 2 year warranty

Extremely stable and robust distortion-free scissor mechanism. A handle can be found for adjusting the automatic locking support arms. The runner can be moved along the support arms to leave the lower section of the vehicle body completely accessible.All axles are equipped with self-lubricating bronze bushings which makes them maintenance-free.

Designed for use around the vehicle, not working under the vehicle.

Use inside a working area sheltered from weather elements (wind, rain, sub-zero temperatures)

Operating temperature range is between 41°F and 104°F. If left in sub-zero temperatures for prolonged periods, allow at least 12 hours before use in a workplace setting.

Do not use in excessively humid conditions. If water is splashed on the lift use a clean cloth to wipe it off.

The floor must be flat and solid to prevent slipping or sinking. Never lift loads on a sloping ground.

Only lift vehicles at the jacking point recommended by the manufacturer.

Before lifting a vehicle ensure the handbreak is released and the vehicle is left in neutral. The wheels need to be freed when leaving the ground, as well as coming down.   

• Check and clean all moving parts
• Check the functionality of the locking system for the 4 support elements
• Check the presence of the mechanical stops for the pad supports
• Check the condition of the hydraulic link
• Check the hydraulic oil level
• Carry out a visual check of the framework
• Perform a no-load lift along the full stroke of the machine

• Full safety check to be performed by authorized personnel

• The hydraulic hose must be replaced if used regularly
• Oil change